Stranda Tree Surfer

• Low Camber
  The centre of the board is raised 6mm. Camber gives the board it’s edge-hold and stability at high speed.

• Tip and Tail Rocker
  The tip has a bit more rocker than the tail. Both lie within the widest points of the board. This makes the board easy to turn and an easy change of edge.

• Swallowtail
  Due to the swallowtail, the tail has less surface area. This sinks the tail and lift the nose. This is exactly what you want in powder.

• Taper
  The nose is wider than the tail. This causes the board to sink at the back. This brings the nose up and that’s exactly what you want in powder.

• Setback
  Setback puts you further behind on your board. The weight transfer to the rear reduces fatigue in your back leg when riding powder. In addition, setback helps when carving to compensate for your forward turn initiation.

• Ash/Poplar Core
  Stranda uses ash wood and a small amount of poplar in their cores. Ash wood is quite flexible and therefore dampens vibrations easily. In addition, the board retains its camber longer. Poplar keeps the weight down.

• Triax Glass
  Fiberglass woven in three directions. This provides torsional stiffness and a better response.

• Carbon Torsion Rods
  Carbon strips have been added in the core. This gives the board more torsional stiffness and pop.

• Bamboo Topsheet
  Bamboo is very flexible and can withstand stress well. In addition to the beautiful appearance, the topsheet helps absorb vibrations and gives the board some extra pop.

• Sintered 4001 Durasurf Base
  A good and fast base that retains its properties for a long time.

• 4×2 Mounting
  Standard inserts. A multitude of options for mounting your binding. Not suitable for channel bindings.

• 4 Year Warranty
  Stranda know their boards are well made. That’s why they offer a 4-year warranty.

Sick and Wrong verdict : ” Perfect for powder, Must have if your off to Japan”